Sormak istedikleriniz için bizimle iletişime geçin
Bizi arayın: +90.312.472 61 08-09
TR / EN /


Pulsed Laser Deposition System - PLD-T | VacCoat Product

Versatile Pulsed Laser Deposition and Thermal Evaporator System – PLD-T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and so Thermal Evaporation technique. It can deposit complex materials and crystalline structures onto substrates with very little setup involved.

Pulsed Laser Deposition technique leads to efficient, none-thermal ablation and preserves the stoichiometry of the target materials. By applying this method it could deposit materials such as nitrides, oxides, super lattices, polymers, and composites. 


  • Target manipulator with adjustable rotation speed
  • 3 thermal sources and special feedthrough
  • Quartz crystal monitoring system for real time thickness measurement (1 nm precision)
  • Intuitive touch screen to control the coating process and rapid data input
  • Plasma Cleaning
  • User friendly software that can be updated via network
  • Equipped with rotary sample holder
  • Equipped with electronic shutter
  • Equipped to motorized boat selection
  • 500 °C substrate heater
  • Two-year warranty
  • Vac coat Products are covered worldwide by both public and product Liability Insurance in case any property damage or personal injury happens caused by the Vac Coat systems.
Pulsed Laser Deposition System - PLD-T Three Shot Grey Framed | VacCoat Product | Pulsed Laser Deposition System

Thermal Evaporation Sources (Boat/Basket/Coil)

The Pulsed Laser Deposition System can be fitted with three independent heat resistance thermal evaporation sources. The good design of the evaporation source holder causes no contamination transfer from sources materials to other materials. The length of source holders can be adjusted in the range of 5~10 cm which meets the costumer requirement.

vac product PLD Internal Sec | Vaccoat Product

Target Manipulator

PLD is equipped with a multi-target manipulator which includes three target with diameter of 2cm. Targets are in standard size and all of our target manipulators are motorized and includes target rotation.

vac product PLD Internal | Pulsed Laser & Thermal Evaporator System

Touch Screen Control with Colorful Display

The pulsed laser deposition system, PLD-T, is equipped with a 7” colored touch screen and fully automatic control and data input that can be operated by even inexperienced users. The vacuum, current, and deposition information can be observed as digital data or curves on the touchscreen. Information of the last 300 coatings can be saved in the history page.

vac product PLD Monitor | Pulsed Laser Deposition System
vac product PLD Touch Screen | PLD System

Specification of Pulsed Laser Deposion & Thermal Evaporator System

Pumping Speed90 l/s350 l/s
Ultimate Pressure7 x10-6  Torr7×10-7 Torr

Options and Accessories

The PLD-T has the following options and accessories:

    • Thermal evaporation sources (Boat/Basket/Coil)
    • 500 °C substrate heater
    • Evaporation sources materials
    • Quartz crystal sensors
    • Sealing gaskets